Configuration of NetComm Modem/Router for TPG IPTV
This precess should work for NB5plus4W or an NB9W or a G604T, and Dynalink RTA1320
Advanced > Internet > IGMP Proxy >
For pppoe_8_35_1 – TICK IGMP Proxy Enabled. Apply.
Advanced > Internet > Connections > Add
Service Category: UBR without PCR
Encapsulation Type: LLC/SNAP
Enable QoS: Turn this OFF
Enable 802.1Q VLAN Tagging: Leave this off
WAN IP – leave as None.
VPI / VCI : 0 / 35
Service Category : UBR
Connection Type : Bridge LLC/SNAP, QoS Off.
Finish – you must click Finish for the modem to reboot loading these new settings.
2 minutes later – IPTV is running.
Here is NetComm’s guide